Your IP: 3.238.204.31
ISP: Amazon Technologies Inc.
Not Protected

VPN24.me Installation Guide for Windows 7 with L2TP/IPSec

1. Enter the Control Panel, you can do that by clicking Start, then selecting Control Panel
windows7-manual
2. Click Network and Internet
windows7-manual
3. Click Network and Sharing Center
windows7-manual
4. Click Set up a new connection or network
windows7-manual
5. Click Connect to a workplace
windows7-manual
6. If you have any available connections, click «No, create a new connection»
windows7-manual
7. Select Use my Internet connection (VPN)
windows7-manual
8. Specify in In the Internet address you need to specify the domain of the location/server that you wish to connect to from our server list
9. Specify in Destination name the name of your connection, i.e. VPN24.me L2TP
10. Check the box Don’t connect now; just set it up so I can connect later
windows7-manual
11. User name: Insert the server Login
12. Password: Insert the server Password
13. Check the boxes Show characters and Remember this password
14. Click Create
windows7-manual
15. Click Close
windows7-manual
16. Click Change adapter settings
windows7-manual
17. Right click on your VPN connection and then click Properties
windows7-manual
18. Click the Security tab, here you will have to change the following settings:
1. Type of VPN: Layer 2 Tunneling Protocol with IPSec (L2TP/IPSec)
2. Data encryption: Require encryption (disconnect if server declines)
3. Allow these Protocols: Radio button selected
4. Challenge Handshake Authentication Protocol (CHAP): Checked
5. Microsoft CHAP Version 2 (MS-CHAP v2): Checked
6. Click Advanced Settings
windows7-manual
19. Specify the Pre-shared key (PSK), and then click Ok
windows7-manual
20. Click Connect to your VPN connection
windows7-manual
Now you need to change your DNS, here’s how to do it:
1. Right-click the network interface connected to the internet, and then select the Properties option.
windows7-manual
2. Select and check the Internet Protocol Version 4 (TCP/IPv4) option
3. Click the Properties button for it.
windows7-manual
4. Click the Use the following DNS server addresses option.
5. Insert your preferred and alternate DNS addresses.
windows7-manual
In case you are using the Google Public DNS, OpenDNS, or a solution like CloudFlare, you can insert any of these settings:
- Google Public DNS: 8.8.8.8 and 8.8.4.4
- OpenDNS: 208.67.222.222 and 208.67.220.220
- Cloudflare: 1.1.1.1 and 1.0.0.1
6. Click the OK button.
7. Click the Close button.
windows7-manual
After you complete all these tasks, your entire set of online activities will be fully secure online and you will have complete anonymity. If you have any questions or inquiries about using VPN24.me, don’t hesitate to get in touch with us right away and we will be more than happy to assist!
Contact Us

Copyright© 2020 VPN24. All rights reserved.
goToTop